Find name/IP address of printer to change settings*Should be label on printer

Login into web interface, you will need to request password from IT

• Monticello - Line1-LA (192.168.169.104)
• Monticello - Line2-LA (192.168.169.119)
• Monticello - Line4-LA (192.168.169.149)
• Kentland - KLine1-LA (10.1.168.104)
• Kentland - KLine2-LA (10.1.168.111)
• Kentland - KLine3-LA (10.1.168.122)
• Yuma - AZLine1-LA (10.5.168.141)
• Yuma - AZLine2-LA (10.5.168.133)

Darkness and Speed settings are contained under “General Setup”

*Note: In general, colder ambient temperatures require a higher darkness level. Warmer ambient temperatures require a lower darkness level.

Warning: Do not change any other settings unless instructed to by IT 

Darkness can be adjusted from 0-30, Normal levels are 15-20

Print Speed setting can be adjusted from 0-12, Normal settings are 6-10

Once setting is changed click “Submit Changes”

Then “View and Modify Printer Settings”

Then click “Save Current Configuration”

You can then close the web browser